R.K. COMPANY

Boats~Motors~Trailers~Fiberglass Repair~All Wood Furniture
(912) 534-5798 ~ (912) 534-6348

Hydraulic Units

Product Image	Item Name
Item #65301 w/ gauge Reg. Price $988.00 Our Price $826.00 Item #65302 w/ out gauge Reg. Price $817.00 Our Price $690.00	PL-65 HS 5-1/2" Set-Back High Speed Hydraulic Jack Plate *NEW* Features Of Patented Hydraulic High Speed Power-Lift® Full Stroke in 8 seconds! No welds or castings to break.There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks. The hydraulic actuator is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic tank and hoses inside the boat). The PL-65 HS is rated for V-6 motors and smaller and gives you 5" of vertical travel with 1-1/2" of adjustment on the motor bracket and 1-1/2" of adjustment on the transom bracket. A TOTAL OF 8" OF POSSIBLE ADJUSTMENT! It also can be purchased with stainless steel motor rails, Model PL-65SS (for V-8 motors 300 HP MAX).

Item #61301 w/ gauge Reg. Price $1,039.00 Our Price $884.00 Item #61302 w/ out gauge Reg. Price $887.00 Our Price $757.00	PL-65 HS 10" Set-Back High Speed Hydraulic Jack Plate *NEW* Features Of Patented Hydraulic High Speed Power-Lift® Full Stroke in 8 seconds! No welds or castings to break.There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks. The hydraulic actuator is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic tank and hoses inside the boat). The PL-65 HS is rated for V-6 motors and smaller and gives you 5" of vertical travel with 1-1/2" of adjustment on the motor bracket and 1-1/2" of adjustment on the transom bracket. A TOTAL OF 8" OF POSSIBLE ADJUSTMENT! It also can be purchased with stainless steel motor rails, Model PL-65SS (for V-8 motors 300 HP MAX).

Tilt & Trim Units

Product Image	Item Name
	PT-130 Power Tilt and Trim • Rated for 130 H.P. and Smaller Motors. • 6" Set Back to Enhance Boat Stability and Performance. • 20° of Trim and a Total of 90° of Tilt and Trim. • 1/2" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners. • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust! • Standard B.I.A. Bolt Hole Pattern. • Convenient Adapter Kit Available for Clamp-on Motors. • Four Stainless Steel Motor Mounting Bolts Included.
Item #13001 w/ gauge Reg. Price $762.00 Our Price $643.00 Item #13002 w/ out gauge Reg. Price $647.00 Our Price $551.00
	PT-35 Power Tilt and Trim (Item #52100) •Rated for 35 H.P. and Smaller Motors. • 5 1/2" Set Back to Enhance Boat Stability and Performance. • 84° of Trim and Tilt. • 1/4" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners. • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust! • Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter. • Weighs Only 24 Pounds!
Item #52100 (gauge not available) Reg. Price $546.00 Our Price $456.00
Item #13003 Reg. Price $346.00 Our Price $303.00	BA-130 Break Away The CMC BA-130 Breakaway unit is designed for duck hunters and/or fisherman that use their boat in shallow stumpy areas. It allows small boats and motors to slide over submerged logs or debris at low speeds to get to a downed bird or your favorite fishing hole. The BA-130 is rated for outboard motors up to a maximum of 130 H.P. The unit is mounted between the boat transom and the outboard motor. It is designed to help minimize damage to the outboard motor and boat transom only when an obstruction is encountered while running at speeds under 5 M.P.H in the forward direction. As it encounters an obstruction momentum causes motor to deflect and rotate up to 45 degrees to slide over the obstruction. A drawbar spring is incorporated in the unit to help return the motor to its normal position. The drawbar spring also holds the motor at the normal position while operating in the reverse direction at low R.P.M. The BA-130 is not designed to encounter obstructions while the boat is being operated in the reverse direction. The unit is pre-drilled with the standard B.I.A. whole pattern. For motors that have clamps with thumb screws, CMC part #13022 Transom Clamp Adapter is required. Product weight is 28 pounds (shipping weight is 33 pounds) and carries a limited 1-year warranty against defects in workmanship. WARNING: The BA-130 is rated for outboard motors up to a maximum of 130 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. The BA-130 is not designed to encounter obstructions while the boat is being operated in the reverse direction.

Home

Copyright . R.K. Company. All rights reserved.